PowerPro performance fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and the ends of each rail are pre tapped to accept -6 AN or 9/16”x18 fittings for users who want to use custom fuel lines.

Item Features:

No additional parts required for installation

Specifically engineered for each application

High quality

O.E. fuel pressure regulator or aftermarket adjustable fuel pressure regulator mounts directly to rail with no modifications

Comprehensive installation instructions, hardware, fittings and injector O-rings included

Price: 155$

———————————————————————————————–

PowerPro Tucked Fuel line fittings Kit -Inline Filter for Honda

This kit replaces the feed hard line and OEM filter with a stylish -6an black Nylon Braided hose, black fittings,
and inline fuel filter. There is no flaring required with our kit. We utilize a special fitting that attaches to the
hard line without any flaring needed. Perfect for anyones skill set. The inline filter attaches straight off the hard
line. The fuel line routes underneath the air intake and up to the fuel rail. Giving your engine bay a nice, clean,
“tucked” looked. Don’t worry, this kit works with any aftermarket fuel rail with a 6an inlet.

We guarantee 100% quality and satisfaction with our fuel line kits.

Features
6an Black Nylon Braided Hose
Vibrant Black Hose Ends
Earl’s Hard Line Adapter
Russel Inline Filter
E85 Compatible
Works with B/D-Series Motors

Black or Purple anodized

 Price : 115$

——————————————————————————————-

PowerPro performance inline fuel filters

650103 Aluminum In-Line Fuel Filter

Specifications:

Made from aluminum, & designed for high volume fuel systems

Offered in -6, -8 and 3/8″ NPT male outlets

40 micron disc element

3/8″ NPT connects directly to fuel pump, Y-block or regulator

Anodized black finish

Price : 35$

——————————————————————————————–

PowerPro performance fuel pump

Our external fuel pump is based on the oem type 0580 254 044 External Inline Universal Fuel Pump

300LPH

Externally mounted, in line electric fuel pump.  300 LPH flow at 43.5 psi (3 bar) and 200 lph at 73.5 psi (5 bar).  You can install this pump along with a high performance in tank pump or by itself and can support 700HP with the proper fuel lines

Specifications:

Can be mounted externally near the fuel tank.

Can be used with stock or aftermarket in-tank pump as well as by itself

Dimensions: 196mm long by 60mm diameter

M18x1.5 female inlet and M12x1.5 female outlet

Fittings kit is not included, however can be purchased seperately

Positive terminal is M6, ground terminal is M5

Price : 165$

———————————————————————————————–

PowerPro performance in tank fuel pump 255LPH

The PowerPro high output in-tank electric fuel pumps are available in multiple flow ratings. These particular pumps flow significantly more fuel at higher pressure. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour.

These electric fuel pumps utilize a proven powerful design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification. Coverage includes most popular Acura and Honda, Ford, Chrysler and many other Import applications.

This item includes the Fuel Pump and installation kit.

Price: 80$

———————————————————————————————-

PowerPro – HULK 440cc fuel injectors

These injectors flow 43 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors represent the most current GripZone engineering and are used on many high power turbo oem applications.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures and in fact, that is exactly what they were designed for!

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a split / wide cone spray pattern for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.

Features:
High performance
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Specifications:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Dual Spray Wide Cone / Split Cone
Electrical Connector: EV1
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 42 lb/hr

Applications:
Mustang & Camaro / Corvette LS1 LT1
Volvo & European makes
Many Japanese makes
Made for high pressure, harsh environment turbo & supercharged applications!

Price: 65$ per pcs (Suggested retail combo 4pcs – 250$ )